Skip to main content

Fencepro Ultra G4

The Ultra G4 post driver has been designed to handle the most difficult fencing conditions globally. Every part is meticulously crafted to ensure many years of trouble free operation - even when working all day in rocks and hard pan. The pin and chain system that guides the post instead of the post cap suits many professional fencing contractors. They can steer the post as it is being rammed in for straight fence lines, even in tough country.

The Ultra G4 has everything the popular Ultra G3 has and more!  A standard 4.8 m hydraulic hinging mast and 300 kg block ensure there is shortage of hitting power and if needed the block can be upgraded to a 350kg weight.

In many parts of the south Island the ground is very rocky and stoney, which requires special techniques and equipment to be effective. The Ultra G4 can be fitted with the Rock Spike Extractor which is ideal for the loose stones in Canterbury. The solid rock substrates such as schist, sandstone, and rotten rock need to be drilled. The Fencepro Rock Drill is the weapon of choice in these situations. The Rock Drill Fits to the Rock Spike Extractor System so you can drill a pilot hole, smack in a Rock Spike or pull out a post all with the same unit. Totally versatile!

The Rock Spike Extractor can also be fitted with the hydraulic turner ram which swings it in and out of the work position. Brilliant on hills and so fast and efficient too. The ram holds it in place so no locking system is needed either. The Ultra G4 is built strong enough to withstand an endless amount of ramming, but not so heavy it is unbalanced on steeper country. 

RB800 180 Degree Rotating Base
Side mount Unit – 900 mm travel (SM900)
Side mount Unit – 420 mm travel (for vineyards)
Rear shift unit – 300 mm travel
Rock Spike Extractor System
Near side mounted manual positioning
Near side mounted Hydraulic Turner
Far side mounted manual positioning
Far side mounting Hydraulic Turner
90 mm or 120 mm Rock Spike
Hydraulic auger – with its own lift ram or mounted to the Rock spike Extractor
75 mm, 100 mm,150 mm or 200 mm augers
Rock Drill with Planetary drive motor (mounts on Rock spike extractor)
Telescopic extension for Rock Drill (auger hole 1500 mm deep)
100 mm, 150 mm and 200 mm Rock Drill augers
350 KG Block upgrade
385 KG Block upgrade
Leg roller kit for side mount unit (ideal for road sides and hard ground)
Post Lifter Kit
Hydraulic leg ram
4.8 metre Hinge Mast - Twin skin
6 Bank valve and 2 bank 2nd tier valve bank (8 functions)
Wide angle Hydraulic top link and 53° side tilt
350 mm Ultra Glide mast shift
300 kg block with Nylon slides
Height adjustable Twin Skinned feet
75mm mast pivot pin
External pressure relief valve
180mm Pulleys & 11mm wire rope
Plastic Guard around pulley housing
330 mm single top plastic pulley
Heavy Duty post cap (40 mm)
Pivoting Valve bank

RB800 Rotational Base

SM1000 Side Mount

Want to know more about this product?