Postcaps & Blocks
| Code | Description | |
|---|---|---|
| Farmtek Standard Postcap - 25mm thick (c/w Rubber Mat and Rope & Chain) | |
| Ultra G2 & Mule Postcap - 25mm thick (c/w Rubber Mat and Rope & Chain) | |
FUPCS with FPCPB (Not stocked item. Only available on request) | ||
| Heavy Duty Postcap - 50mmthick. (c/w FPCPB) | |
| Farmtek Postcap Rubber Mat (210mm x 245mm) | |
| Ultra G2 & Mule Postcap Rubber Mat (245mm x 260mm) | |
| Heavy Duty Postcap Plastic Block - 40mm | |
| Rope & Chain-link for all Postscaps | |
| Postcap Weld-on Grip-spike | |
| Ultra Block replacement Nylon Slides (set of 2) | |
| Ultra Block Pin |
Wire Ropes & Pulleys
| Code | Description | |
|---|---|---|
| Mule & Farmtek 9mm Wire Pope (4m - 4.5m masts) With standard thimble | |
| Ultra G2 9mm Wire Rope (With Pipe- type Thimble) | |
| Ultra G3 1mm Wire Rope (With pipe-type Thimble) | |
| Ultra G1 11mm Wire Rope (only older single-top-pulley) | |
| Wire Rope Clamp (9 & 11mm ropes) | |
| Ultra Pipe-type Thimble only | |
| Common Ø140mm Wire Rope pulley and Bearing (9mm groove) | |
| Ultra G3 Ø180mm Wire Rope pulley and Bearing (11mm groove) | |
| Ultra G1 Ø250mm Wire Rope pulley and Bearing (11mm groove) | |
| Ultra G3 Ø300mm Wire Rope pulley and Bearing (11mm groove) | |
| Common Single Pulley Pin | |
|
| Common Triple pulley pin (Ø25mm X 100mm) | |
| 6205C3 Bearing | |
| M24X3mm Pulley Spacing Washer |
Feet & Mounting Pins
| Code | Description | |
|---|---|---|
| Mule & Ultra Foot | |
| Farmtek Foot | |
| Side-mount Foot | |
| Leg Roller Kit. (Specify what model. Farmtek 700mm wide Ultra & mule around 900mm wide) | |
| Cat II Lower Link Pin (Ø1 1/8” X 125mm) & Linch Pin | |
| Cat II Long Toplink Pin (Ø1” X 125mm) & Linch Pin | |
| Cat II Short Toplink Pin (Ø1” X 115mm) & Linch Pin | |
| Common Foot-retaining Pin (Ø3/4”X95mm) & Linch Pin | |
| Common Ram Pin (Ø1” X 80mm) | |
| SM900 & RS250 Hose Guide & Spring | |
| Ultra Block Pin |
Rockspike Common Parts
| Code | Description | |
|---|---|---|
| Rock-Spike Plastic Cap (Ø158 X 50mm UHMWPE) | |
| Ø90mm Rock-Spike Spacing Cage | |
| Rock-Spike Cap Ring | |
| Rock-Spike Top Profile andRing | |
| Ø90mm Rock-Spike (1600mm long) | |
| Ø120mm Rock-Spike (1600mm long) | |
| Rockspike Manual Latch Grip, Symmetrical. | |
| Top Mount Plate | |
| 6204 Bearing | |
| Manual Work-latch Spring (C-267) | |
Hydraulic Turner Ram | ||
Extractor Ram |
Rockspike Near Side Parts
| Code | Description | |
|---|---|---|
| Bottom Mount | |
| New Top Mount to Suit Manual and Hydraulic on Both Sides. | |
| Old Manual Top Mount | |
| Traveller | |
| Manual Top Plate Assembly | |
| Manual Top-latch (Pre 2016) | |
| Manual Work-latch (Pre 2016) | |
| Manual Work-latch Spring (C-277) (Pre 2016) | |
| Manual Work-latch Spring (C-267) | |
| Rockspike Manual Latch Grip, Symmetrical. | |
| Handle | |
Nearside Manual Rockspike Extractor kit. (Excludes rockspike and valve slices) | ||
Nearside Hydraulic Rockspike Extractor Kit. (Excludes rockspike and valve slices |
Rockspike Far Side Parts
| Code | Description | |
|---|---|---|
|
| Bottom Mount | |
|
| New Top Mount to Suit Manual and Hydraulic on Both Sides. | |
| Traveller | |
| Manual Work-latch Spring (C-267) | |
| Rockspike Manual Latch Grip, Symmetrical. | |
| Handle | |
Farside Manual Rockspike Extractor kit. (Excludes rockspike and valve slices) | ||
Farside Hydraulic Rockspike Extractor Kit. (Excludes rockspike and valve slices) |
Augers
| Code | Description | |
|---|---|---|
| Auger Motor & Hoses | |
| Rockspike Mounting Kit | |
| Mast Mounting Kit (includes one lift ram) | |
| 75mm Auger (1100mm long, tungsten pilot) | |
| 100mm Auger (1100mm long, tungsten pilot) | |
| 150mm Auger (1100mm long, tungsten pilot and teeth) | |
| 100mm Earth Pilot | |
| Fencepro Earth Tooth for 150 & 200mm augers and rockdrills. | |
| 100mm Fencepro Rockdrill RockPilot | |
| Auger Tungsten Tooth for 150mm & 200 mm augers and rockdrills. |
Rockdrill
| Code | Description | |
|---|---|---|
| Rockdrill Motor (Planetary Drive) with mounts for Rock-Spike extractor | |
| Telescopic extension Kit | |
| 100mm Rockdrill (includes Tungsten pilot) | |
| 150 mm Rockdrill (Includes Tungsten pilot & teeth) | |
| 200 mm Rockdrill (Includes Tungsten pilot & teeth) | |
| 100mm Fencepro Rockdrill Rock Pilot | |
| Auger Tungsten Tooth for 150mm & 200 mm augers and rockdrills. | |
| 3/4” UNC x 4” Z/P Bolt andNut | |
| 100mm Earth Pilot | |
| Fencepro Earth Tooth for 150 & 200mm augers and rockdrills. |
Valve-bank Parts
| Code | Description | |
|---|---|---|
| Brevini DCV40 Lever-box Kit complete (no handle) | |
| Brevini DCV40 Connectin Pinonly | |
| Brevini Closed Centre / High-pressure Carry-over plug | |
| Walvoil SD11 Lever-box kit complete (no handle) | |
| Walvoil SD11 High-pressure Carry-over plug | |
| Walvoil SD11 Closed-centre plug | |
| Galtech Q45 Lever-box kit complete (no handle) | |
| Common Long Handle (Lift Ram) - M10 x 250mm | |
|
| Short valve lever handles - M10 x 200mm long |
Hydraulic Fittings
| Code | Description | |
|---|---|---|
| Pressure Relief Valve Complete | |
| Ultra ram Hydraulic Lock Valve | |
| Ball Valve kit - 1/4" BSPP Ports | |
| 8000-series (1/2") Hydraulic Hoses (0.7-3.1m) | |
|
| 6000-series (3/8") Hydraulic Hoses (0.9-2.2m) | |
|
| 4000-series (1/4") Hydraulic Hoses (0.6-2.8m) | |
| 3/4 " Female QRC fitting | |
|
| 3/4 " Male QRC fitting | |
|
| 1/2" Female QRC Fitting | |
|
| 1/2" Male QRC Fitting | |
|
| 3/8" Female QRC fitting | |
|
| 3/8" Male QRC fitting |
Miscellaneous
| Code | Description | |
|---|---|---|
Paint-Gloss Black Enamel-500ml | ||
Pain-Fencepro Orange Enamel-500ml | ||
Decal-Large 3-colour range ($ per decal) | ||
Decal-Small/1-colour range ($ per decal) | ||
| SM900 Plastic Toolbox | |
| 60L Toolbox With Lid and Latch | |
| Lower Drop-stop pin (Ø20 X 40mm)) | |
| Professional Fencing Spade - Short-Handle | |
| Professional Fencing Spade - Long-Handle | |
| Chainsaw Holder | |
| Mast Pivot Pin Washer | |
| Mast Hinge Bump Block | |
| Mast Hinge Latch | |
| Ultra G3 Ram Cover |
